1L , 5L ,18L , 20L Paint mixing machine , automatic paint shaking
machine
Technical Data
- Time of Shaking: 1min-9min
- Size of Shaking can: 0.5~20L
- Load of Shaking can: 1~30KG
- Frequency of shaking: 710 times/min
- Height of Shaking can: 80~410mm
- Power Supply: 220V±10% 50HZ
- Rated Power: 750W
| Machine Size | 740(l)*800(w)*1070(h)mm |
| Packing Size | 770(l)*840(w)*1210(h)mm |
| Net weight / Gross weight | 223 KG / 258KG |
Features
Automatic clamp and adjustable pressure to bear on the can
according to the can size, will not squish or stave the can.
It’s suitable to 0.5L-20L all kinds of can/barrel, max load weight
is 30kg.Easy operation and few maintainence: with PLC microcomputer
control, can set the shaking time freely by the “T1”“T2” “T3” time
key, the longest time can be set is 9 mins.
High speed and thoroughly mixing by up and down continuous
multi-shake movement.Low noise and high safety.
Chinese and english interface on the control panel for easy
operation.Large door with front roller for easy can loading.
Control panel introduction
- T1 button (1 min button): press this button, the clamping plate automatically clamps the
canister, and finish appointed 1 minute mixing.
- T2 button(3 min button): press this button, the clamping plate automatically clamps the
canister, and finish appointed 3 minutes mixing.
- T3 button(5 min button): press this button, the clamping plate automatically clamps the
canister, and finish appointed 5 minutes mixing.
- T1+T2: Press T1+T2 at the same time , clamping plate automatically clamps
the canister, and finish appointed 4 minutes time mixing.
- T1+T3: Press T1+T3 at the same time , clamping plate automatically clamps
the canister, and finish appointed 6 minutes time mixing.
- T2+T3: Press T2+T3 at the same time , clamping plate automatically clamps
the canister, and finish appointed 8 minutes time mixing.
- T1+T2+T3: Press T1+T2+T3 at the same time , clamping plate automatically
clamps the canister, and finish appointed 9 minutes time mixing.
- Button (Stop, lift button) :
- A). When machine is in the state of "Mixing" or "Clamping", LCD
shows "Mixing" or "Clamping". At this time, press this button,
machine will stop mixing or clamping and lift the clamping plate.
- B). When machine is in the "ready" state, LCD shows "Ready". At
this time, press this button, the clamping plate will lift up, and
stop when you release the button.
Company Profile
Foshan YiJiu Paint Tinting Equipment Co., Ltd. was established in 2010. locates in Shunde ,China. which is widely
famous for its developed manufacturing business. We are specialized
in paint tinting and mixing equipments, collect R&D,
manufacturing, sales and after sales service together.
In line with reliable, sincere, reciprocal, mutually beneficial,
YiJiu Co. have been and will keep provides high quality, high
accuracy, high cost-effective paint equipments to all our
customers. Thanks to the know-how of our technicians and the well
trained administrative staffs. we are able to offer considerate and
responsible service.
We have wide connections with wholesalers and retailers all over
the world. We welcome new and old customers from all walks of life
to contact us for future business relationships and mutual success!
Our Service
- Warranty: We offer a period of one year warranty for each equipment. Within
guarantee period, we can help you judge the fault according to the
failure phenomenon by E-mail. and send replacement part to you. If
the fault has been caused by mis-use or abnormal conditions of
operation, repairs will be billed at a normal cost in this case. An
estimate will be submitted before repair work is started in case
requested.
- Training:You can send personnel to our factory for free training on the
machine.
- Inspection: You can send inspectors to our factory for inspection or we
self-inspect following the technical requirements mentioned in contracts.
- Testing of equipments: all our machines are tested before shipment. All machines are at
its optimal state when shipped.
